The regulation regarding the installation of FPV on public reservoirs comes over two years after MITECO put the decree to public consultation.
The royal decree has not made major changes from the initial issue, aside from setting a limit on the maximum amount of surface of water a PV project can occupy. Mesotrophic waters, those considered ‘clear water’, will have a maximum capacity of 5% of the reservoir’s surface; however this increases to 15% for eutrophic waters, those with a high biological presence.
Solar PV plants will not be installed in lakes, ponds or other water surfaces that have not been altered or are not considered artificial.
Awarded licenses are to be temporary, lasting no more than 25 years, either through the proposal of companies or through public auctions.
MITECO will also establish tracking policies to study the possible environmental impacts and to better understand how the technology works, however the ministry did stress it sees it as “beneficial not only for energy production but also for the environment”.
You can read here the press release from MITECO (in Spanish) for more information regarding the regulation of FPV on public reservoirs.
It remains to be seen if the list of public reservoirs available for FPV installations continues to be the same as two years ago. See below for a list published in 2022:
Last month, Spanish solar PV tracker manufacturer Soltec launched a new floating tracker designed for inland water bodies such as reservoirs and ponds. The new tracker features an east-west tracking system, similar to horizontal ground-based solar trackers, and what the company described as an “advanced naval design” that enables it to withstand the rigours of being located on water.
This post was originally published on 3rd party site mentioned in the title of this site
