Image: First Solar
From pv magazine India
The minimum module efficiencies for ALMM enlistment across large-scale (utility-scale), rooftop solar and solar lighting applications are as follows:
The ALMM mandate, reimposed from April 1, 2024, requires solar projects awarded by central agencies and state distribution utilities to only source PV modules from the manufacturers included on the ALMM list. The list currently only features domestic solar original equipment manufacturer (OEMs) and includes modules with efficiencies equal to or greater than 19%.
First Solar CdTe thin-film modules have one of the lowest carbon and water footprints of any commercially available PV module today.
“The MNRE directive mandating a minimum [c-Si] module efficiency of 20% for utility-scale photovoltaic (PV) projects serves as a catalyst for innovation and technological advancement within the industry. One of the keys to meeting the MNRE’s efficiency requirements lies in offering advanced technologies such as half-cut mono facial and bifacial modules, along with more sophisticated TOPCon (Tunnel Oxide Passivated Contact) panels,” said Akshay Mittal, director of Bluebird Solar. “These technologies offer higher efficiency levels, with module efficiencies exceeding 22%. By embracing these cutting-edge solutions, manufacturers can not only meet the mandated efficiency standards but also enhance their competitiveness in the dynamic solar PV market landscape.”
Under the MNRE directive, modules with efficiencies of 19.5% and 19% are eligible for rooftop and solar water pumping installations, and solar lighting projects, respectively.
“With PM Suryaghar Muftbijli Yojana and PM Kusum Yojana in place, PV modules below 20% efficiency can be effectively utilized in various rooftop and other solar applications, thus maximizing their contribution to rural electrification and agricultural sustainability,” said Mittal.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
This post was originally published on 3rd party site mentioned in the title of this site